Eris® Pro 8 (Single)

Listen to your mixes reproduced with lifelike realism! The Eris® Pro 8's symmetric design and consistent acoustic center provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

The Eris Pro 8's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 8 provides a superior listening experience for both home studios and professional mix rooms.

A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 8-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 8 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.

Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 8 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 8 monitors into any stereo or multi-channel system.

Features
  • Single point-source coaxial design for wider sweet spot and better phase alignment
  • 8-inch, woven-composite, low-frequency driver
  • 1.25-inch, silk-dome, high-frequency driver
  • 140W, Class AB amplification
  • 35 Hz to 20 kHz frequency response
  • 108 dB SPL (Peak, @ 1 meter
  • Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
  • XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
  • Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
  • Power Saver mode (engages after 40 minutes of no audio)
  • Wall and ceiling mountable

The New Eris Pro Series Studio Monitors | PreSonus

$499.99 $399.99
Live Sound & Recording Deals
More On The Way

Order now and we expect to ship within the next 30 days

Listen to your mixes reproduced with lifelike realism! The Eris® Pro 8's symmetric design and consistent acoustic center provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

The Eris Pro 8's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 8 provides a superior listening experience for both home studios and professional mix rooms.

A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 8-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 8 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.

Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 8 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 8 monitors into any stereo or multi-channel system.

Features
  • Single point-source coaxial design for wider sweet spot and better phase alignment
  • 8-inch, woven-composite, low-frequency driver
  • 1.25-inch, silk-dome, high-frequency driver
  • 140W, Class AB amplification
  • 35 Hz to 20 kHz frequency response
  • 108 dB SPL (Peak, @ 1 meter
  • Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
  • XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
  • Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
  • Power Saver mode (engages after 40 minutes of no audio)
  • Wall and ceiling mountable

The New Eris Pro Series Studio Monitors | PreSonus

Downloads

Don’t see what you're looking for? Log in to your my.presonus.com account.

Highlights & specs
Inspired design for inspiring results.

Placing the high-frequency driver in the center of the low-frequency driver increases clarity, widens stereo imaging, and produces an incredibly even mid-range. Vocal clarity, the attack of a snare, and guitar presence shine through, allowing you to quickly and accurately place them in a mix and get the results you desire faster than ever before.

Inspired design for inspiring results.
Symmetric response.

The Eris Pro 8’s coaxial design provide a symmetrical dispersion resulting in a crisper stereo image, greater soundstage depth, and superior separation between components in a complex mix.

Symmetric response.
Set up your studio monitors for your room.

Acoustic Tuning controls ensure you’ll get the flattest frequency response possible in your mix environment. You get Low Cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Set up your studio monitors for your room.
Measurements
  • Width
    10.63" (27 cm)
  • Height
    12.82" (32.6 cm)
  • Depth
    12.2" (30.1 cm)
  • Weight
    20.9 lbs. (9.5 kg)
Electronics
  • Voltage Requirements
    100-240 VAC, 50-60 Hz
  • Connection Type
    IEC
Hardware
  • Cabinet Material
    Vinyl-Laminated, Medium-Density Fiberboard
Monitors
  • Protections
    RF Interference
    Output-Current Limiting
    Over-Temperature
    Turn-On/Off Transient
    Subsonic Filter
  • Audio Switches
    Acoustic Space (Flat, -2 dB, -4 dB)Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
  • Audio Controls
    VolumeHigh Frequency (±6 dB, center 10 kHz, continuously variable)Mid Frequency (±6 dB, center 1 kHz, continuously variable)
  • Peak SPL
    108 dB (@ 1 Meter)
  • Crossover Frequency
    3.1 kHz
  • Monitor Inputs
    1- Balanced XLR, 1- Balanced 1/4” TRS, 1- Unbalanced RCA
  • HF Transducers
    1.25” Silk Dome Tweeter (Coaxial)
  • LF Transducers
    8" Woven Glass Fiber Composite (Coaxial)
  • Frequency Response
    35 Hz - 20 kHz
  • Input Impedance
    10 kΩ
  • Monitor Amplifier Power
    140W Bi-Amped
Specifications
  • Input Impedance
    10 kΩ

CALIFORNIA PROPOSITION 65 WARNING


WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Eris® Pro 8 (Single)
$499.99 $399.99
 

Verified In Stock: DATE