Sceptre® S6 Studio Monitor

The Sceptre® S6 two-way monitor combines a 6.5-inch low/mid-frequency driver and a 1-inch (25 mm), horn-loaded, high-frequency transducer into a single coaxial unit with aligned voice coils. Its advanced coaxial design, based on Fulcrum Acoustic's TQ™ Temporal Equalization, works integrally with a 32-bit, 96 kHz, dual-core processor to deliver clarity and coherence that has previously only been available in ultra-high-end systems. Add 180 watt, Class D biamplification; acoustic ports; a rich set of acoustic adjustments; and full speaker protection; and you have a new, affordable monitoring standard.

Features
  • CoActual technology combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
  • Unique coaxial transducer integrates 6.5-inch midrange driver and 1-inch (25 mm) horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
  • 32-bit, 96 kHz, dual-core, active floating-point DSP provides critical Temporal Equalization™ with multiple FIR filters
  • Acoustic-tuning controls: HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB), Acoustic Space (0 dB, -1.5 dB, -3 dB, -6 dB), highpass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -12 dB/octave slope), Sensitivity (+4 dBu to -10 dBV)
  • 180W RMS, Class D biamplification with internal heat sink
  • RF shielding, current-output limiting, and over-temperature protection
  • Includes Studio Magic, a suite of over $1000 USD worth of music production software
$899.99
More On The Way

Order now and we expect to ship within the next 30 days

The Sceptre® S6 two-way monitor combines a 6.5-inch low/mid-frequency driver and a 1-inch (25 mm), horn-loaded, high-frequency transducer into a single coaxial unit with aligned voice coils. Its advanced coaxial design, based on Fulcrum Acoustic's TQ™ Temporal Equalization, works integrally with a 32-bit, 96 kHz, dual-core processor to deliver clarity and coherence that has previously only been available in ultra-high-end systems. Add 180 watt, Class D biamplification; acoustic ports; a rich set of acoustic adjustments; and full speaker protection; and you have a new, affordable monitoring standard.

Features
  • CoActual technology combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
  • Unique coaxial transducer integrates 6.5-inch midrange driver and 1-inch (25 mm) horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
  • 32-bit, 96 kHz, dual-core, active floating-point DSP provides critical Temporal Equalization™ with multiple FIR filters
  • Acoustic-tuning controls: HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB), Acoustic Space (0 dB, -1.5 dB, -3 dB, -6 dB), highpass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -12 dB/octave slope), Sensitivity (+4 dBu to -10 dBV)
  • 180W RMS, Class D biamplification with internal heat sink
  • RF shielding, current-output limiting, and over-temperature protection
  • Includes Studio Magic, a suite of over $1000 USD worth of music production software
Downloads

Don’t see what you're looking for? Log in to your my.presonus.com account.

Highlights & specs
CoActual Speaker Design

CoActual speakers employ a HF driver placed in the middle of the LF driver for symmetrical response horizontally and vertically, increasing the sweet spot, clarity and imaging. An onboard DSP running Fulcrum Acoustics’ TQ™ algorithms provides detailed adjustments for an even mid-range with an inaudible crossover transition.

CoActual Speaker Design
Accurate transient reproduction.

Consonant sounds in speech, percussion, and attack and decay of musical instruments are all transient signals. When reproduced accurately, the result is sonic transparency, definition, and intelligibility. With their excellent transient reproduction, CoActual speakers minimize distortion and produce clean, clear, consistent audio at any SPL.

Accurate transient reproduction.
World-class recording software included.

Sceptre S6 studio monitors come with a special edition of PreSonus® Studio One™ Prime recording and production software, with the entire Studio Magic software suite enabled. Studio Magic includes over $1,000 USD worth of music software including plug-ins, loops, virtual instruments, effects and tutorials.

World-class recording software included.
Measurements
  • Width
    9" (22.9 cm)
  • Height
    13.2" (33.5 mm)
  • Depth
    12.2" (30.1 cm)
  • Weight
    18.8 lbs. (8.53 kg)
Electronics
  • Voltage Requirements
    100-240 VAC, 50-60 Hz
  • Connection Type
    IEC
Hardware
  • Cabinet Material
    Vinyl-Laminated, Medium-Density Fiberboard
Monitors
  • Protections
    RF Interference
    Over-Current
    Over-Voltage
    Over-Temperature
    Turn-On/Off Transient
    Subsonic Filter
    External Mains Fuse
  • Audio Controls
    Volume Range: A-Type TaperHF Control: Flat, +1, -1.5, -4 dBLow Cut: Flat, 60, 80 Hz, 100 HzAcoustic Space: Flat, -1.5, -3, -6 dB
  • Peak SPL
    109 dB (@ 1 meter)
  • Crossover Frequency
    2.2 kHz
  • Monitor Inputs
    1 x Balanced XLR, 1 x Balanced 1/4" TRS
  • HF Transducers
    1" Titanium Diaphragm Compression Driver
  • LF Transducers
    6.5” Glass-Reinforced Paper
  • Frequency Response
    52 Hz - 20 kHz (-3 dB), 42 Hz - 23 kHz (-10 dB)
  • Input Impedance
    10 kΩ
  • Monitor Amplifier Power
    LF Amplifier - 90W, HF Amplifier - 90W
Specifications
  • Input Impedance
    10 kΩ

CALIFORNIA PROPOSITION 65 WARNING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Sceptre® S6 Studio Monitor
$899.99
 

Visit Website >
Verified In Stock: DATE